Choose your product category and question or type in your question in the box above Click here for Brochures and Technical Downloads If you cannot find the answer you need please contact us on 0800 002 9903 or Chat Online
Non, la couleur se trouve à sur le devant et le débord devant des bandeaux de rives. L'arrière et le débord arrière sont blancs.
Oui, utilisez un bon apprêt et utilisez de la peinture PVC. Cependant, si les panneaux Freefoam sont peints, cela annulera votre garantie Freefoam.
Utilisez un silicone non corrosif, ou une super-colle et un activateur en pvc appropriés.
Freefoam effectue des tests météorologiques étendus à tous les produits.
Notre gamme de couleurs est soutenue par notre propre technologie innovante ColormaxTM. Colormax offre une solidité et une variété de couleurs révolutionnaires, ainsi qu'une correspondance fiable des couleurs. Nous utilisons une sélection unique de stabilisateurs et de pigments pour garantir une grande solidité des couleurs et avons mis au point un procédé avancé dans lequel un composé naturel de PVC est dosé en ligne avec des concentrations spécifiques de pigment. Cela nous permet de produire facilement et rapidement des couleurs durables de haute qualité. Les formulations des produits ont été adaptées en fonction de l'application. Par exemple, pour le blanc et les couleurs plus pâles, les niveaux de dioxyde de titane (Ti02) sont augmentés dans les zones soumises à des niveaux élevés de lumière ultraviolette (UV) et à des températures extrêmes pour contrer l'effet d'une forte lumière solaire. Nous testons tous les produits et les résultats des tests des produits de couleur montrent que nous pouvons offrir une garantie sur la stabilité des couleurs pendant 5 ans.
Les produits blancs sont garantis 10 ans en standard. La garantie sur les produits blancs peut être étendue à 50 ans si elle est enregistrée en ligne par un installateur agréé Freefoam. Nous sommes en mesure d'offrir une garantie prolongée parce que Freefoam a réussi la transition vers un système de stabilisation sans plomb plus avancé et plus robuste. Le stabilisateur est basé sur la nouvelle technologie Octyl Tin, est conforme à REACH et offre une série d'avantages distincts par rapport aux stabilisateurs Calcium Organic, et il est capable de constituer la base des formulations de produits dans un avenir prévisible.
Freefoam fabrique la gamme de couleurs et, après des tests complets, nous sommes convaincus de pouvoir offrir une garantie de 10 ans.
Le garantie pour les couleurs grain de bois est régi par le film extérieur. C'est la fine couche qui recouvre les surfaces blancs pour créer l'effet de grain de bois. Le film est fabriqué par Renolit, l'un des principaux fournisseurs de films au monde. Freefoam utilise le film PVC Exofoil de Renolit
Renolit offre une garantie de 10 ans sur le film, que Freefoam transmet à ses clients.
Les planches ont une finition brillante.
Les instructions pour la pose des bandeaux et des rives sous-faces se trouvent dans notre catalogue de produits.
Trouvez ici le lien aux instructions de pose complètes
Si vous n'êtes pas sûr, vous devriez demander conseil à un professionnel dans votre région.
Freefoam fabrique un profile latérale pour le montage autour des fenêtres et des portes. Code produit FC319E3.
Freefoam fabrique une large gamme d'accessoires de bardage.
Non, uniquement le Fortex Clic 180 et les bardages X-Wood.
Trouvez ici le lien à l'instruction de pose verticale
Les lattis horizontales doivent être fixées sur des contre-lattes verticales pour faciliter la ventilation et le drainage de la cavité.
Une profile en "J" peut être utilisée à la place d'une profile de départ à la base de l'installation, mais elle doit être perforée pour permettre à l'eau de s'échapper. Veuillez consulter les instructions sur ce lien.
Le haut de l'installation doit être fermé avec notre set d'arrêt ventilé en 2 parties FC311E3.
Prévoir une dilatation/ventilation de 14 mm. Le jeu de dilatation est alors couvert par la deuxième partie du set d'arrêt (la couvertine).
Est-ce que j'ai besoin d'une ventilation pour le revêtement ? Combien ? Pourquoi est-ce que c'est nécessaire?
La ventilation empêche le bardage de surchauffer, ce qui peut entraîner le gauchissement et la décoloration/la décoloration du bardage.
La ventilation garantit également que les lattis en bois restent en bon état et que toute moustille peut s'évaporer
Une ventilation est nécessaire autour des fenêtres et des portes
Pour des détails généraux sur la ventilation, voir le point 14 dans les instructions de pose de bardage.
Le bardage en PVC peut être posé sur un bâtiment en tôle d'acier. La pose standard est requise. Les lattis de bois ou de métal ne doivent pas être posées à plus de 400 mm d'entre-axe. Consultez les instructions de pose de bardage pour plus d'informations. Une ventilation est nécessaire en haut et en bas et selon nos directives.
En raison des conditions et des exigences locales, consultez toujours votre conseil municipal/agent du bâtiment pour déterminer si le site convient.
Fortex n'est pas classé comme incombustible et ne doit donc pas être utilisé dans des situations où les réglementations en matière de construction exigent des matériaux incombustibles. Le classement D-s3.d2/AHM dans le certificat d'essai signifie que le bardage Fortex est classé comme zone non protégée dans le document approuvé B1, partie 4. Le système de bardage Fortex est adapté à une utilisation sur des murs extérieurs à condition qu'il soit installé là où des zones non-protégées sont autorisées dans le Document approuvé B1 - Maisons d'habitation, Partie 4 - Propagation du feu à l'extérieur.
Le bardage en PVC-UE pourrait brûler tout seul. Vous devrez consulter votre agent local du bâtiment pour savoir si le revêtement convient ou si des matériaux supplémentaires sont nécessaires pour obtenir un classement au feu de 30 minutes.
Le classement au feu D-s3, d2 fait référence à la propagation de la flamme en surface et signifie que Fortex est classé comme une zone non-protégée dans le document B1 approuvé par la réglementation en matière de construction, de sorte qu'il y a des limitations sur l'emplacement et la quantité qui peut être utilisée.
Des vis sont toujours nécessaires pour l'installation d'un bardage et elles n'empêcheront pas les panneaux de se dilater ou de se contracter.
Le revêtement Fortex peut être repeint, mais il s'agit d'un processus spécialisé et qualifié. Nous pouvons vous informer qu'il existe une méthode d'application d'un revêtement acrylique au moyen d'un pistolet à peinture avec utilisation préalable d'un agent nettoyant, mais l'obtention de bons résultats nécessiterait les services d'un professionnel expérimenté. Si la surface est petite, il est préférable d'appliquer le produit au pinceau, mais nous ne connaissons malheureusement pas de solution de peinture en un seul paquet applicable au pinceau.
L'application d'un revêtement annulera automatiquement votre garantie car nous n'avons donné aucune approbation à aucun produit. Toute application de revêtement serait donc effectuée à vos propres risques. Il est vivement conseillé de consulter les fabricants avant toute application
Le bardage en PVC convient aux propriétés domestiques jusqu'à 10 m/ 3 étages. Vérifiez les conditions locales du site et contactez le responsable local du contrôle des bâtiments pour vous assurer que tous les éléments de conception et de sécurité sont respectés.
Si un mur est déjà suffisamment résistant aux intempéries, vous n'avez pas besoin de la membrane respirante.
La membrane respirante est disponible dans tous les magasins de produits de construction pour le commerce ou le bricolage.
Freefoam ne fabrique pas et ne fournit pas ce produit, et ne peut donc pas faire de commentaires sur des types ou des lieux spécifiques. Cela devra être confirmé par le fabricant de la membrane respirante ou par l'agent local de contrôle des bâtiments, afin de s'assurer que votre installation est conforme à la réglementation en matière de construction.
Les bardages enrobés FC151 et le X-Wood FCV143 ont 10 ans de garantie.
FCF170, FCG182, FCD333, FCD300 ont une garantie de 10 ans sur les couleurs claires et de 5 ans sur les couleurs foncées.
Les vis de bardage ACSS250 sont en acier inoxydable de classe 304 J3
Les bardages Freefoam ne doivent pas nécessairement être installer sur des briques ou tout autre type de maçonnerie.
Notre bardage est un écran de pluie, il ne contribuera pas à la résistance au feu ou aux performances structurelles du mur. Vous devrez donc vous assurer que le mur répond déjà aux caractéristiques de performance requises.
Oui, une membrane respirante est nécessaire pour empêcher l'humidité/l'eau de pénétrer dans le bâtiment.
Non, un espace minimum de 25 mm entre la membrane et le revêtement est nécessaire pour faciliter la ventilation et empêcher l'accumulation de chaleur, le gauchissement, la décoloration, etc.
Freefoam ne fabrique ni ne fournit de lattis de bois ou de fixations pour les lattis.
Nous pouvons vous conseiller que le support sur lequel vous fixez peut varier tellement qu'il n'est pas approprié de donner des conseils autres que de recommander des chevilles et des vis ou des clous express lors de la fixation sur la maçonnerie. En cas de doute, consultez le fabricant des fixations envisagées pour obtenir un avis définitif sur l'adéquation
Les fabricants des fixations envisagées doivent être consultés pour obtenir un avis définitif sur leur adéquation.
Freefoam a développé un calculateur de bardage très pratique.
Cliquez sur le lien ci-dessous pour découvrir le nombre de planches et de paquets de bardage dont vous aurez besoin pour votre projet.
Calculateur de bardages
Cliquez ici pour lire un article de Freefoam sur la calculateur de bardage
Comparé au bois plus traditionnel, le bardage et la toiture en PVC sont des produits qui nécessitent très peu d'entretien.
Tous nos produits extérieurs en PVC sont dotés de propriétés de résistance aux intempéries qui garantissent qu'ils sont suffisamment durables pour résister aux intempéries et minimiser le risque d'usure sévère.
Cependant, il existe un certain nombre de mesures que vous pouvez prendre pour les aider à conserver leur aspect neuf le plus longtemps possible.
Utilisez un nettoyant spécialement conçu pour les panneaux en PVC ou lavez-les à l'eau chaude savonneuse (voir ci-dessous). Vous pouvez également utiliser un nettoyeur haute pression (réglé à mi-puissance) de temps en temps pour le garder propre et exempt de saleté ou de taches.
Comment nettoyer le PVC si vous n'utilisez pas de nettoyant pour panneaux en PVC ?
Étape 1 : Préparez une solution composée d'une cuillère à soupe de liquide vaisselle et d'un litre d'eau chaude dans un seau en plastique propre. Mélangez soigneusement la solution.
Étape 2 : Essuyez les panneaux en PVC avec la solution à l'aide d'un chiffon en microfibre ou d'une éponge. Enlevez autant de saleté et de crasse que possible. Rincez fréquemment le chiffon à l'eau douce pour éviter de réappliquer la saleté sur le panneau en PVC.
Étape 3 : Rincez les panneaux en PVC à l'eau douce pour éliminer les résidus de savon et/ou la saleté détachée.
Étape 4 : Polissez les panneaux avec un chiffon en microfibres propre et sec pour les faire briller et empêcher les résidus de savon d'être visibles.
Zones côtières : Dans les zones côtières, un nettoyage plus fréquent peut être nécessaire.
Lisez l'article sur notre site Web ici
Pour voir notre gamme complète de bardages, cliquez ici.
The thermal conductivity is 0.06W/mK but you wouldn’t use it in a calculation because the cladding has to be fitted to battens to form a drained and vented cavity. Instead, you would use an alternative external surface resistance value.
The value should be available in u-value calculating software but the value for low emissivity walls below should also be acceptable.
Changing the external resistance value will have a negligible effect on the final u-value.
Freefoam have developed a handy Cladding Calculator. Click the link below to find out how many boards and packs of cladding you will need for your project.
Cladding Calculator
To see how to fit cladding take a look at our cladding animation here
https://www.youtube.com/watch?v=vB0O4hUGNUU
When compared to the more traditional timber PVC roofline and cladding is an extremely low maintenance product.
All of our external PVC products come with weather-resistant properties that ensure they are durable enough to withstand harsh weathering and minimise the risk of severe wear and tear.
However, there are a number of steps you can take to help keep them looking as good as new for as long as possible.
Use a specially formulated PVC panel cleaner or wash down with warm soapy water (see below). You can also use a pressure washer (adjust to half power) every now and then to keep it clean and free from dirt or stains.
How to clean PVC if you’re not using PVC panel cleaner
Step 1: Create a solution of 1 tablespoon of washing up liquid, and 1 qt. of warm water in a clean plastic pail or bucket. Thoroughly mix the solution.
Step 2: Wipe the PVC panels with the solution using a microfibre cloth or sponge. Remove as much loose dirt and grime as possible. Frequently rinse the cloth with fresh water to avoid reapplying dirt to the PVC panel.
Step 3: Rinse the PVC panels with fresh water to wash away any of the soapy residue and/or the loosened dirt and grime.
Step 4: Buff the panels with a clean dry microfiber cloth to add shine and prevent soap scum from being visible.
Coastal areas: In coastal areas more frequent cleaning may be required
Watch a handy video where we show you how to keep cladding clean and tidy.
Darker colours are more susceptible to the subtle weathering that occurs due to heat from the sun so we only guarantee the colour will remain within its original colour range for 5 years.
For full details on the cladding guarantee
Please find link to full Cladding fitting instuctions.
You can also see how to fit cladding by taking a look at our cladding animation video here
If you are not sure you should seek advice from a professional tradesperson in your area.
Freefoam manufacture a Reveal Liner for fitting around windows and doors. Product code FC319E3 and FC318E3.
Please find link to full Cladding Fitting Instructions.
Freefoam manufacture a range of cladding trims.
Please find link to full Claddding Fitting Instrutions which show the trim range.
Yes, all Freefoam cladding can be fitted vertically.
Please find link to Fixing Vertically Cladding
Horizontal battens need to be fixed onto vertical counter battens to facilitate ventilation and drainage of the cavity.
A ‘J’ trim can be used instead of a starter trim at the base of the installation but it should be perforated to allow any water to escape. Please see instrucions at this link.
The top of the installation should be closed with our 2 Part Vent Starter/Closer Trim FC311E3.
Allow 14mm expansion/ventilation The expansion gap is then covered by the second part of the trim.
Any Freefoam cladding product can be specified as part of the Green Homes Grant.
It must be fitted with an appropriate insulation material.
It must be fitted by a Trust Mark accredited installer
For more information go to
https://www.gov.uk/guidance/apply-for-the-green-homes-grant-scheme#what-the-voucher-can-be-used-for
https://www.simpleenergyadvice.org.uk/
https://www.trustmark.org.uk/
Cladding installations should have 5,000mm² per linear metre of ventilation (the equivalent of a 5mm continuous gap) at both the top and bottom.
Ventilation prevents the cladding from overheating, which can cause the cladding to warp and discolour/fade.
Ventilation also ensures that the timber cladding battens remain in good condition and any mositure can evaporate.
Ventliation is required around Windows and Doors
For General ventilation details see Item 14 on Cladding Fitting Instructions
Read a useful article HERE on Cladding Ventilation
PVC Cladding can be fitted over a sheet Steel building. The standard fitting is required. Wood or Metal battens should be fitted no more than 400mm apart-. Check Cladding Fitting instructions for more information. Ventiklation is required top and bottom and as per our guidelines.
Due to local site conditions and requirements, always consult with your local council/ building officer to determine suitability.
Fortex is not classed as non-combustible so should not be used in situations where the building regulations call for non-combustible materials. The D-s3.d2/AHM rating in the test certificate means Fortex cladding is classed as an unprotected area in the Approved Document B1, Part 4. Fortex cladding system is suitable for use on external walls provided it is installed where unprotected areas are allowed in the Building Regulations Approved Document B1 – Dwelling houses, Part 4 – External Fire Spread.
Please go to Downloads for all information on Fire Rating https://freefoam.com/professional/downloads
PVC-UE cladding on it's own could burn. You will need to consult with your local building officier for suitability or additional materials required to achieve a 30min fire rating.
Please go to https://freefoam.com/professional/downloads for all information on Fire Ratings
The D-s3, d2 fire rating refers to surface spread of flame and means Fortex is classed as an unprotected area in the Building Regulations Approved Document B1 so there are limitations on the location and quantity that can be used.
Building Regulations Approved Document B1 stipulates the quantity and location of unprotected areas.
The amount of unprotected area allowable on a given façade depends on the orientation and proximity of boundaries, use class and height of buildings etc. and assessment should be carried out on a case by case basis according to the specific situation.
Because of this, we avoid giving general advice and recommend that installations are assessed for compliance with Approved Document B1.
The fire ratings relate to various contributions to fire, from very limited to easily flammable.. Pvc cladding offers medium contributions to fire and is self extinguishing, it will burn if you put a fire to it, but as soon as you remove the source it will go out.
PVC cladding is suitable for domestic properties up to 10m/ 3 floors. Check local site conditions and contact local Building Control Officer to ensure all design and safety elements are met.
There are two situations.
1. If you are replacing like for like, eg pvc cladding is being replaced with pvc cladding then no Building Regulations are needed.
2. If you are replacing another materials for example hanging tiles or wood cladding then contact your local Building Control department for advice.
Screws are always required for cladding installation and they will not prevent the boards from expanding or contracting. Freefoam provide a cladding screw, Freefoam Producdt Code ACSS250.
Cladding Fitting Guide
Freefoam PVC cladding is manufactured from a non-combustible materia.
An Architect, M&E consultant will be able to provide further advice on combustible materials proximity to a given flue outlet. In this instance Freefoam Cladding would be treated like any other combustible material. Please refer to Building Regulations. The Building Regulations Part J dictate where a flue can be located (or if the flue is already in place, what can be positioned near it).
Fortex cladding can be repainted but it is a specialised and skilled process. We can inform you that there is a method of applying an acrylic coating by means of a spray gun with prior use of cleansing agent but obtaining good results would require the services of an experienced professional. If the area is small applying by brush maybe preferred but we unfortunately are not aware of any one pack paint solution applicable by brush.
Applying any coating will automatically void your guarantee as we not given any approval to any product. Any coating application would therefore be taken at your own risk. Consultation with manufacturers would be strongly advised before any application.
If a wall is already suitably weatherproof you don’t need the breather membrane.
Breather membrane is available from any Trade or DIY building product store.
Freefoam do not manufacture or supply this product, so are unable to comment on specific types or locations. This would need to be confirmed by the breather membrane manufacturer or local building control officer, to ensure your installation conforms to building regulations.
See Cladding Fitting Instructions for more information
Please contact Freefoam on 0800 002 9903
We can then advise on suitable local supplier.
Yes cladding can be fitted in a coastal area.
Please see page 40 of 'The Technical and Specification Manual' that states In coastal areas more frequent cleaning may be required.
We have instructions for a Dormer Cheek installation on our Technical Downloads page
Please click here
Foiled Claddings FC151 and the X-wood FCV143 come with a 10 year guarantee.
FCF170, FCD333, FCD300, FV100 have a guarantee of 10 years on the lighter colours and 5 years on darker colours.
The ACSS250 cladding screws are Stainless Steel Grade 304 J3
Freefoam cladding doesn’t need to be fitted over brickwork or any other type of masonry.
Our cladding is a rainscreen, it won’t contribute to the fire resistance or structural performance of the wall so you’ll need to be satisfied that the wall already meets the required performance characteristics.
It’ is outside our remit to advise on how this is achieved but a typical construction, from inside to out would be;
Plasterboard
Vapour Control Layer
Timber Frame
OSB
Breather Membrane
Timber battens
Cladding
July 2019
We are adding an aluminium version of the trim to the range later this year but unfortunately it’s not available yet.
In the meantime you can bring the sketch below to any company that fabricates steel flashings/trims and they’ll usually make it while you wait.
Also a type 6 folded aluminium cill from Archital in Shropshire would be suitable. If you are ordering this you can use the dimensions A = 26, B = 64, C = 25
https://archital.co.uk/aluminium-cills/
Yes, a breatherable membrane is required to prevent humidity/ water from entering the building.
No a minimum 25mm space between the membrane and cladding is required to aid ventilation and prevent heat build-up/ warping and discolouration etc.
Sept 2019
In the meantime you can bring the sketch attached to any company that fabricates steel flashings/trims and they’ll usually make it while you wait.
LPS or LPCB are fire tests to a BS standard 8414-1
BS 8414-1:2015 Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems applied to the masonry face of a building for External Thermal Insulated Cladding Systems with rendered finishes.
The Fortex Cladding range have been tested to EN 13501-1, meets the requirements of the EU CPR (Construction Products Regulations 305/2011) and achieves a D, S3, d2 fire rating as per the enclosed fire test document.
EN 13501-1
Fire classification of construction products and building elements. Classification using test data from reaction to fire tests.
Freefoam do not manufacture or supply timber battens or fixings for battens.
We can advise that the substrate you are fixing to can vary so much that it isn’t appropriate to give advice beyond recommending plugs and screws or express nails when fixing to masonry. If in doubt; Consult the manufacturer of the fixings being considered for final advice on suitability
When fixing to timber a general rule of thumb is the woodscrew should be approximately 3 times the thickness of the timber being fixed, for 25mm battens a 70mm long screw would be appropriate.
The manufacturers of the fixings being considered should be consulted for final advice on suitability.
When compared to the more traditional timber PVC fascia is an extremely low maintenance product.
You can use specially formulated PVC panel cleaner, a mild, non-abrasive cleaner designed for PVC. Or you can simply wash down fascia, soffit and gutter occasionally with mild detergent and water (see below). Clean out gutters of leaves, debris and moss. This ensures they maintain optimum performance.
Coastal areas: In coastal areas more frequent cleaning may be required.
No, the colour finish is on the front of the board and the front edge. The back and back edge are white.
Yes, use a good primer, and use PVC paint. However if Freefoam boards are painted this will void your Freefoam guarantee.
Use any non-corrosive silicone, or a suitable pvc superglue and activator.
Freefoam perform extensive extended weather testing to all products.
Our colour range is backed by our own innovative ColormaxTM technology. Colormax provides ground-breaking colourfastness, colour variety, and reliable colour matching. We use a unique selection of stabilisers and pigments to ensure high colourfastness and have developed an advanced process where natural PVC compound is dosed online with specific concentrations of pigment. This enables us to produce long lasting high quality colours easily and quickly. Product formulations have been adjusted to suit the application. For example, for white and paler colours Titanium Dioxide (Ti02) levels are increased in areas subject to high levels of Ultra Violet (UV) light and extreme temperatures to counteract the effect of strong sunlight.We test all products and the results for testing the colour products show we can offer a guaratnee on colour stability for 10 years.
White products are guaranteed for 20 years as standard. The guarantee on white products can be extended to 50 years if registered online by a Freefoam Registered Installer. We’re able to offer an extended guarantee because Freefoam has made a successful transition to a more advanced and robust lead-free stabilising system. The stabiliser is based on new Octyl Tin technology, is REACH compliant and provides a range of distinct advantages over Calcium Organic stabilisers, and it is capable of forming the basis of product formulations for the foreseeable future.
Freefoam manufacture the colour range and after comprehensive testing we are confident to offer a 10 year guarantee.
The guaratnee on the woodgrain range is governed by the outer 'foil' . This is the thin layer that covers the white boards to create the woodgrain effect. The 'foil' is manufactured by a world leading film provider Renolit. Freefoam use the Renolit Exofoil PVC film that offers a durable fade resistant outer layer. The colour pigments in the base layer of the film incorporate Solar Shield Technilogy to protect against excessive heat build up. The upper transparent layer features a PMMA film iwth UV proitection.
Renolit offer a 10 year guarantee on the foil, which Freefoam pass to our customers.
The boards have a glossy finish.
Instructions for fitting fascia and soffit can be found in our Product Catalogue.
Download a copy here
Please see video here
The nail shank is 3.1mm diameter, the pin shank is 2.1mm.
Please find link to Stockist Finder
Enter your postcode and you will see a list of your local Freefoam stockists
Product Dimensions are also included in the Technical and Specification Manual.
CAD files are provided for the majority of products
Link to CAD Files
Veuillez trouver le lien vers Trouver un revendeur
Entrez votre code postal et vous verrez une liste de vos revendeurs Freefoam locaux
Les dimensions des produits sont également incluses dans le manuel technique et de spécifications.
Les fichiers CAO sont fournis pour la majorité des produits
Lien vers les fichiers CAO
Our Ogee gutter will fit with either Square or Round downpipe.
No, but we have an Anthracite Grey rainwater range which is RAL 7016.
Freeflow can be fitted in these conditions. We advise to reduce the support clip spacing to 800mm as a precaution.
The Cast Iron gutter range is guaranteed for ten years
The Fire Rating for all Geopanel internal panels is Class 1A.
For more information download the Datasheet here
Fitting Instructions are included in every pack of Geopanel Internal Panelling.
Please see link to Geopanel Fitting Instructions.
A non-solvent based glue should be used
See Fitting Instructions
A generic bathroom Sealant should be used in any wet area. Avilable from Trade and DIY Stores
Please see Fitting Instructions for more information.
Yes.
The boards are tongue and groove.
The Joining strip will only be needed when the height of the wall exceeds the height of the panel.
Joining will be horizontally between boards
We suggest using our Geopanel Cleaner which can be purchased from Freefoam stockits.
Product Code GEOCLINSPRAY
Link to find your local stockists
You can also use any general non abrasive cleaner e.g Flash.
Use of abrasive cleaning products may cause delamination of the panels.
We would advise the use a rubber washer against the panel with a metal washer behind. This will prevent any damage to the panels.
Panel/Rubber Waher/Metal Washer/Seat Bracket/Screw or fixing.
the PVC Geopanel range can be used in kitchens
It must not be subject to temparature of more than 60 degree celsius.
Please see Data Sheet
Use a toggle fixing and a washer on the face of the panel or a plasterboard fixing with a washer again to stop the screw pulling through.
The Light Reflective Value for the Matt Range is 8 -10 degree while the Light Reflective Value for the Gloss range is 90-92 degree
No we would not recommend Geopanel internal panelling be fitted horizontally in a wet area.
It is acceptable to cut into the Vented Soffit. The reduction in overall ventilation would be negligible to non-existent.
LED IP65 lights will not get very hot but we recommend you contact the light fitting manufacturer about heat generation of its products.
Your electrician will also be able to advise.
We would recommend approx 25 spaced every 200mm.
This equates to a 10mm airflow.
There are two differences
F112 is extruded with more PVC making it a heavier board. The wall thicknesses is also slightly thicker.
F112 is used as the base board for the Woodgrain and Colour range.
F312 is only available in white
Both F112 and F312 are 300mm hollow soffits and not suitable or recommended for exterior cladding applications. The guarantee would be void if fitted as exterior cladding.